Deep Tech Networking Engineer, DPDK / Linux - Paris - H/F
Hybrid
English (B2)
Salary
Not stated
Description
The company builds embedded networking products, including 5G and edge gateways, OLTs, carrier-grade routers and NPU-based appliances.
Its systems forward tens to hundreds of Gbps on Arm64 SoCs, x86, ASICs and DPUs, under tight power and hardware limits. The dataplane runs on DPDK or dedicated hardware, and Linux handles the control plane.
Performance is measured with Mpps, p99 latency, jitter and watts per Gbps on hardware deployed in production at scale.
Open source is central to the team's work. Improvements go upstream to DPDK, Linux, U-Boot and Buildroot instead of being kept as private patches that must be reapplied at every rebase. Upstream work can take 20% to 80% of your time, depending on the project and your experience, and is planned and tracked like any other deliverable.
The team wants engineers who make packets go faster, understand why, and prove the gain with numbers.
Responsibilities
Design, develop and optimise high-performance networking systems, from hardware up to the dataplane.
Connect the Linux control plane to the dataplane by keeping routes, neighbours and interfaces in sync through netlink.
Maintain exception paths to the kernel using virtio-user, TAP and shared-memory rings.
Develop Linux networking for embedded targets, including netdev and PHY drivers, phylink, DSA, switchdev, TC flower, XDP and AFXDP.
Work close to the hardware with VFIO, IOMMU, hugepages, CPU isolation, device trees, U-Boot and Buildroot.
Profile and measure performance using perf, ftrace, bpftrace, PMU counters, TRex, pktgen and testpmd.
Investigate hard production problems such as intermittent packet drops, descriptor exhaustion, cache contention and IOMMU faults.
Work directly with SoC and NIC vendors on drivers, firmware interfaces and solutions that can be upstreamed.
Submit and review patches, respond to maintainers and follow changes until they are merged.
Write design documents, review code and help other engineers grow.
Scope depends on your experience: you may start by owning a feature, a PMD or a board family, or later own the architecture of a whole dataplane subsystem across several products.
In your first year, bring the stack up on target hardware, reproduce existing performance baselines and deliver a measurable improvement on a production platform.
Requirements
Open to experienced open-source contributors and to engineers with strong foundations who want to build deep expertise in Linux networking and packet processing.
Strong C programming skills and a solid grasp of Linux systems.
Good knowledge of L2 and L3 networking: Ethernet, VLAN, IPv4/IPv6, ARP/ND, routing, FIB lookups, VXLAN, GRE and IPsec.
Experience with DPDK or another high-performance packet-processing stack such as VPP, ODP, AFXDP or OVS-DPDK.
Understanding of performance topics such as caches, NUMA, DMA, PCIe and SR-IOV.
Experience with, or strong interest in, Linux kernel networking, embedded systems, drivers, cross-compilation or board bring-up.
A disciplined approach to optimisation: measure, change, compare and document.
Clear written English for technical documentation, code reviews and upstream discussions.
You do not need to master every technology listed. What counts is what you have built, how deeply you understand it and the technical impact you can show.
Public open-source contributions are valued. If your strongest work is closed-source, be ready to explain the technical decisions, constraints and results.
For Staff and Senior Staff roles, a proven public track record is expected, through patches, reviews, maintainer duties or contributions to projects such as DPDK, Linux, U-Boot, Buildroot, Zephyr, Yocto, FRR or VPP.
Experience with SmartNICs or DPUs such as NVIDIA BlueField, Marvell OCTEON, NXP DPAA2 or Intel IPU is a plus.
Experience with switchdev, SAI, SONiC, PTP, TSN, KernelCI, LAVA or DPDK DTS is a plus.
What matters most is what you have shipped, what you can demonstrate and the technical impact you want to create.
Conditions
Based in Paris, with one to two remote-working days per week.
Recruitment process: a 15-minute phone screen with Steve (recruiter), a 30-minute interview with Vincent (hiring manager), a 60-minute technical interview, and a 60-minute HR interview with Sarah and Steve.
The group enforces a strict policy against discrimination and harassment and welcomes applications regardless of background, age, origin, gender or sexual orientation.
Benefits
Profit-sharing and incentive scheme tied to group performance.
Reimbursement of the company's home internet plan.
Secure bicycle parking.
On-site restaurants and cafeteria.
Internal mobility across the Iliad Group.
Regular training and access to Free University.
Workspace in an iconic building that is part of Paris's architectural heritage.
Up to 70% of public transport costs reimbursed.
Swile meal card worth €10 per working day, with 60% paid by the company.
Comprehensive health and income protection coverage.
Time Savings Account (Compte Épargne Temps, CET).
CSE employee benefits, including gift vouchers, discounts and exclusive offers.