The company builds vehicles and driving experiences, from battery and drive hardware to software and safety features, and its products carry millions of people every day.
The role develops physics-based models of electric machines, inverters and full electric-drive systems, and uses them as a virtual test environment so control algorithms can be built and checked before hardware or dyno assets exist.
You will connect motor-control theory, plant modeling and SIL environments to support virtual calibration, automated software verification and vehicle-level analysis.
You will work with controls, software, calibration, power electronics and vehicle teams, using digital twins and virtual test benches to find root causes, reduce risk on edge cases and improve efficiency, robustness and performance of the electric vehicles.
Responsibilities
Build and maintain physics-based dynamic models of electric drives covering AC machines, three-phase inverters, DC-link behavior, PWM and voltage synthesis, sensing, electromagnetics, losses, nonidealities, temperature, parameter variation and protection limits.
Choose the model fidelity for each use, such as control design, algorithm work, SIL co-simulation or vehicle simulation, and apply reduced-order, average-value or switching representations where they fit.
Use MATLAB/Simulink and related tools to assess control performance, efficiency, losses, torque response, current quality, robustness, stability and behavior across the drive operating envelope.
Turn motor, inverter, dyno and vehicle test data into model parameters and validation cases, compare simulation with measurements, find the cause of any mismatch and recommend model or control changes.
Plan and run simulations, parameter sweeps, corner cases, sensitivity studies and automated regression tests across speed, torque, voltage, temperature and parameter variation.
Integrate validated drive models and virtual controllers into SIL and co-simulation environments, checking interfaces, signal definitions, initialization, execution timing and behavior while keeping the physics and control fidelity intact.
Help share common plant models and simulation assets across SIL, HIL and vehicle-level CoSIM work with Plant Modeling, HIL, Controls, Software, Calibration and Systems teams.
Document assumptions, equations, parameter sources, limitations, interfaces, validation evidence and the limits of each model so controls and calibration engineers can use them correctly.
Improve model fidelity, simulation speed, automation, usability and virtual development tools, and give targeted technical support to simulation users.
Requirements
Bachelor's degree in Electrical, Mechanical or Computer Engineering, or a related engineering discipline, or equivalent experience.
At least 3 years of experience in electric-machine modeling, motor control, power electronics, electric-drive simulation, or a mix of these.
Solid understanding of AC machine operating principles and three-phase switching converter topologies.
Experience building or using dynamic, physics-based, reduced-order or control-oriented electric-drive models.
Experience with MATLAB/Simulink for electric-drive modeling, control simulation, data analysis or algorithm verification.
Understanding of field-oriented control, space-vector or sinusoidal PWM, current regulation, coordinate transformations, torque control, maximum-torque-per-ampere and flux weakening.
Ability to analyze simulation results, form and test hypotheses and solve complex technical problems with sound engineering methods.
Ability to read embedded C algorithms and software/model interfaces. Hands-on embedded software development is helpful but not the main focus of the role.
Ability to communicate technical information clearly and work with controls, software, calibration, motor, inverter, test, systems and tools teams.
Ability to work independently, manage priorities and deliver technically sound results with proper documentation.
Preferred: Master's degree in Electrical, Mechanical or Computer Engineering, or a related discipline, or equivalent experience.
Preferred: Experience modeling permanent-magnet synchronous, induction or other AC machines, including nonidealities, saturation, losses, thermal effects or parameter identification.
Preferred: Experience simulating and verifying motor-control algorithms across a broad operating envelope, including high-speed operation, voltage and current limits, field weakening and transient events.
Preferred: Experience correlating electric-drive models with dynamometer, laboratory, HIL, vehicle or production data.
Preferred: Experience with automated simulation, parameter sweeps, regression testing or data analysis using MATLAB scripts, Python or similar tools.
Preferred: Experience with SIL, HIL, vehicle-level co-simulation, Functional Mock-up Interface (FMU) concepts or related model exchange and co-simulation standards.
Preferred: Familiarity with GM electric-drive simulation tools and workflows, such as GMSIM, SIL instrumentation, FMU Studio or similar environments.
Preferred: Hands-on work in a high-voltage laboratory, dynamometer, inverter, motor or electric-drive development setting.
Preferred: Familiarity with Git, continuous integration and Agile product development.
Primary focus: physics-based electric-drive modeling; motor-control algorithm simulation and verification; model correlation, parameterization and validation; electric machine, inverter and system behavior.
Secondary focus: SIL and co-simulation integration and model deployment; model interfaces, execution timing and regression automation; user support and technical documentation; collaboration with tools and software teams.
Conditions
The company does not sponsor immigration for this role. Applicants who will now or later need company immigration sponsorship, including H-1B, OPT, STEM OPT, CPT, TN or J-1 status, or any work authorization that requires a written submission or other support from the company, should not apply.
Some candidates may be asked to complete a role-related assessment and/or a pre-employment screening before starting.
The company is committed to equal employment opportunity and to an inclusive workplace free of unlawful discrimination.
Benefits
Support for your well-being at work and at home, plus Total Rewards programs covering your career and pay.